10ml 4-Vial Lock Case — Drop-Proof PETG Peptide Vial Box
10ml 4-Vial Lock Case — Drop-Proof PETG Peptide Vial Box
Built on a larger 10ml-size shell, this drop-proof PETG lock case carries four standard 10ml vials in molded recessed slots — or a custom 2×3ml + 2×10ml mixed tray if you need both sizes in one case. The PETG inner tray is 3D-printed to your vial drawing and lifts out for easy reorders. Food-grade PETG with lid & base sponge cushions absorbs drops, bumps and stacking pressure in lab, fridge or transit. Custom color & logo from MOQ 50, free sample, 15–25 days bulk. Need a compact 3ml-only case? See the 3ml 4-slot edition.
Specifications — 10ml 4-Vial Lock Case (Larger Shell), Insert Made to Your Vial
| Item | Value |
|---|---|
| Material | Food-grade PETG four-piece construction (inner tray / base / lid / snap-lock) + dual-sided sponge cushions (lid & base)+All peptide vial boxes ship in protective export cartons with insert support. |
| Shell | 4-slot snap-lock shell sized for 10ml vials — physically larger than the compact 3ml edition. Outer size: 4 × 10ml glass vials : 56mm × 56mm × 60mm; Mixed 2 × 3ml + 2 × 10ml: 56mm × 56mm × 60mm/56mm × 56mm × 67mm.(Bottom raised plate) |
| Capacity | 4 × 10ml glass vials — standard for this larger shell, molded recessed slots Compact 3ml-only case — see the 3ml 4-slot edition page (separate smaller shell) Mixed 2 × 3ml + 2 × 10ml, or any mix — custom-molded insert in this 10ml shell |
| Printing | CMYK + Pantone matching ｜ offset / UV / foil stamping / embossing |
| Finish | matte / gloss ｜ Closure: snap-lock latch |
| MOQ / Sample / Lead time | 30 pcs ｜ 5–7 days ｜ 15–25 days |
Custom Removable Insert — 10ml or Mixed Layout, Made to Your Vial
The PETG inner tray is 3D-printed to your vial size and simply lifts out of this 10ml shell — order four 10ml cavities, or a mixed 2×3ml + 2×10ml tray for the same case. Dual-sided sponge cushions in lid and base hold every vial top and bottom. For a compact 3ml-only case, see the 3ml 4-slot edition.
Popular layouts on this 10ml shell:
| Layout | Best for |
|---|---|
| 4 × 10ml | Reconstituted peptides, larger doses — standard for this shell |
| 2 × 3ml + 2 × 10ml (mixed) | Mixed-use kits, clinics & salons — two builds available: flat (3ml vials sit lower) or raised 3ml pockets (small vials sit level with the 10mls for a tidy, rattle-free pack). Both in stock on the same shell. |
Color & Finish Editions — Custom Color, Pattern & Logo
This 10ml edition has shipped in pink + white and custom OEM colors. Every cell below is a real shipped colorway or pattern — tap one and we reproduce it on this shell. MOQ: stocked colourways from 30 pcs; full-custom colours, patterns or logos from 50 pcs (logo included) (CMYK + Pantone, offset / UV / foil / embossing). Samples are shown unbranded or with our own mark to protect clients' IP.
Stocked edition — ships from MOQ 30
One of the custom colors we have produced for a customer
Custom logo printing — shown with our own FU YANG mark (offset / UV / foil / embossing)
Sample of a custom color + logo combinationWill Your 10ml Vial Fit? — Pair With a Matching Glass Vial
Already have your vials? This edition is rated for four standard 10ml vials (approx. Ø24mm). A mixed 2×3ml + 2×10ml tray can be fitted to the same 10ml shell on request. Not sure which size fits? Compare real photos and full dimensions in our 3ml–20ml glass vial size chart.
Need the vials too? One factory – box and vial matched. We are a direct manufacturer of pharmaceutical-grade glass vials (2ml–30ml, clear & amber, rubber stopper & flip-off cap options). Buy the box and the vial together: one purchase order, one QC standard, no size-mismatch risk.
- 2ml 3ml 5ml Glass Vials — 16 mm body, same stopper
- 3ml 10ml 15ml glass vials — 22 mm body, same stopper
- 20ml 30ml glass vials — 24/27 mm body Order the vial, the tray and the box together and they arrive matched — from one factory, in one shipment.
- 3ml 4-Slot Edition — White + Red Classic (compact smaller shell for 3ml vials)
Want a different colorway on this 10ml shell? Choose any tone and add your logo under Customization below — we produce them from MOQ 50.
Why Choose This 4-Slot Snap-Lock Vial Case
Where This 4-Slot Vial Case Goes to Work
Laboratory Storage — four 10ml vials (or a custom mixed tray) held separate in molded recessed slots, no mutual collision or friction. Refrigerated Programs — dual-sided sponge cushions keep vials fixed against bumps inside the fridge. Outdoor Transit — the impact- and pressure-resistant PETG shell shields fragile glass from drops, bumps and stacked-parcel extrusion.
Keeps four vials upright and organized — a tidy peptide vial storage case for bench, fridge shelf or travel bag.works as a 10ml vial storage box with dust-proof snap lid.
Shockproof Materials & Build Structure
The removable PETG inner tray is molded with four independent recessed slots that perfectly separate and hold individual vials without mutual collision or friction — cut to 10ml or a mixed 2×3+2×10 layout to order. Thick shock-absorbing sponge cushions are pre-installed on both the top lid and bottom base — the dual-sided lining tightly wraps each glass bottle, fixing it firmly in position to eliminate sliding and prevent breakage of high-value peptide samples. Food-grade PETG adds chemical resistance for long-term lab and refrigeration use.
Factory QC, Drop Test & Quality Assurance
Every batch passes in-house QC before shipment, run on our own test machines — drop, pull, torque, rotation and climate chamber — plus a 100% dimensional and appearance check on every piece.
| QC check | What we check & our pass standard |
|---|---|
| Drop test | Free-fall onto a hard surface from approx. 1.0 m, sampled from every batch — shell stays intact and the snap-lock stays shut. Drop height can be adjusted to your transport spec. |
| Latch & hinge cycling | Machine-driven open/close cycling on the rotation tester — verified for 300+ cycles without loosening or hinge failure. |
| Pull / closing force | Latch closing force sampled on the pull tester and kept within factory tolerance, so every case has a consistent, secure snap. |
| Climate cycling | Constant temperature & humidity chamber simulates sea-freight conditions — checked for warp, brittleness or color shift after the cycle. |
| Material / moisture | PETG is vacuum-dried before printing so walls and slots stay dimensionally accurate and free of voids. |
| Final inspection | 100% visual + dimensional check before packing — outer size, slot openings, tray fit, color and logo registration. |
Customization Process — MOQ 30, Free Sample, 15–25 Days
Send Inquiry (24h reply) → Free Design & Structural Proof (48h) → Sample (5–7 days) → Confirm & 30% Deposit → Production with QC (15–25 days) → Ship & After-support Stocked pink-white runs from MOQ 30; custom tones also from MOQ 50 — mixed tray layouts share one MOQ
Pricing, MOQ & Order Volume
Indicative pricing for this item is quoted in a band of US $2.39 – 2.49 / pc EXW Guangdong, before freight. Where you land inside that band is set by two things: how far the build is customized, and how large the run is. The lower end of the band is not an order-quantity price — it is the level we reach on high-volume and repeat programs, where tooling and print setup are spread over a large piece count. At the MOQ the same stocked color build is quoted at the figure shown below. We would rather put both numbers on the page than let you anchor on one we cannot hold at small quantities.
| Configuration | Order quantity | Indicative unit price (EXW) |
|---|---|---|
| Standard build — stocked color, no logo | 30–49 pcs | US $2.49 / pc |
| Standard build with your UV-printed logo | 30–49 pcs | US $2.69 / pc — +US $0.20 for the UV print |
| Standard build with your UV-printed logo | 50 pcs and up | US $2.49 / pc — logo included free |
| Standard build — same construction, larger run | High-volume runs and repeat orders | towardsUS $2.39 / pc |
| Fully customized build + logo — a custom insert, a different slot count, or a special finish | 50 pcs and up | quoted on your artwork and quantity |
In short:US $2.49 / pc for 30–49 pcs in a stocked color with no logo, and US $2.69 / pc with your UV-printed logo. From 50 pcs the logo is included at US $2.49 / pc, and high-volume or repeat programs step down towards US $2.39 / pc. Fully customized builds are quoted on your artwork and quantity. Every figure is indicative — not a ceiling and not a floor: your firm price can land slightly above or below it once your drawing and run size are confirmed.
Quantity is the main lever. Pricing is quoted against your actual quantity, colour and finishing. A short run carries more setup per piece; high-volume and repeat quantities spread that setup and move the unit price down towards the lower end of the band. Because artwork and tooling stay on file, a reorder skips the setup step. Send your target quantity and we return a tiered quote — for example 500 / 2,000 / 5,000 pcs — with the sample plan.
MOQ.30 pcs — stocked colour, with no logo. A UV-printed logo adds US $0.20 per piece at 30–49 pcs and is included free from 50 pcs. 50 pcs for anything further: a custom insert, a different slot count, or a special finish.
Prices are indicative, quoted EXW Guangdong, and exclude freight, duties and packing extras. The final quotation follows your specification, quantity, artwork and packing requirement — quotation within one working day, sample approved before mass production.
FAQ — 4-Slot PETG Peptide Vial Case
Send your vial size + quantity — get a quote with free structural design within 24 hours.
Send Inquiry WhatsApp
Contact us
Comprehensive score